You are here

RF PHASE COMPARATOR

The device is suitable for phase comparison of systems to be connected on live MV networks. The device set consists of a transmitter and a receiver unit with radio frequency communication. The receiver unit gives information via different light and sound signals whether the phase detected is the same or differs from the one detected by the transmitter. The comparison is continuous, there is no time limit. The communication distance of the two units is 15-20 m. The devices shall be used with the appropriate manipulating rods tested for the given voltage levels.

Type Rated
voltage
Max.
voltage
Treshold voltage Product code
VKP-RFA-638/A 6-38 kV 40,5 kV 2 kV <= U2 <= 3,5 kV 505308
VKP-RFA-638/V 505309
VKP-RFA-638 505310

 

Recommended products

OPERATING TESTER FOR LIGHTING - VKP-KLT04

Type VKP-KLT04 is available for on-site testing lamps, which are used on public lighting system. The handle of meter is fast and easy with shoulder bag, device weight 2kg.

VOLTAGE DETECTOR FOR BUS-BARS

The device is suitable for the continuous indication of voltage being present on bus bars and other equipments having nominal voltage of 10-36 kV.

LV PHASE COMPARATOR FOR 0,4 kV NETWORK

On 0,4 kV three-phase networks (aerial or insulated) the LV phase comparator is able to identify the phases between the base station anda remote point.The transmitter devise shal

DC VOLTAGE DETECTOR -VKP-E-1

The instrument is applicable mainly in case of the electrictowing at direct voltage (subway train, tram, trolley).

VOLTAGE DETECTORS FOR MV AND HV

They can be used for indicating rated voltage on medium voltage AC equipments. They can be used together with operating rods appropriate for the tested voltage levels.

ELECTRICITY METER WITH DUMMY LOAD-VKP-M2

The dummy load type VKP-MT/3F is applied to test the operability as well as significant measurement accuracy problems of the one or three-phase electricity meters.

RF AMMETER SET

The VKP-AMM ammeter is suitable for quickly measuring the operating current of the 0,4-35 kV networks (bus-bar or aerial).

MEDIUM VOLTAGE BREAK INDICATOR

They can be used for indicating rated voltage on medium voltage AC equipments. They can be used together with operating rods appropriate for the tested voltage levels.

Pages